Janus cylinders are manufactured in an all stainless steel 316 design. The cylinders come in a standard of “end types” threaded rod, spherical rod end, piston end flange, piston spherical rod end etc. Janus cylinders may also be customer specified. From ∅32 to 150mm bores as standard.
Filters and Accessories
Filter elements are available up to a pressure difference resistance of ∆p 160 bar and a rupture strength of ∆p 800 bar.
Manufactured in 316 stainless steel as standard, the product offers excellent resistance to corrosive fluids. The materials utilised internally can be selected to suit the most appropriate combinations for not just tap water but also sea water and various other fluids.
Minimal pulsation is experienced with these units due to the multiple piston design and the high operational speeds. The physical size of the motor in comparison to the power generated offers one of the most compact drive solutions.
Up to 9 pistons per pump ensure very small pressure ripples removing the need for accumulators. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate effectively with water as their only coolant/lubricant. The potential for cross contamination of the system fluid or the lubricating oil is removed.
The pumps are manufactured in 316 or duplex materials making them highly resistant to corrosion and ideal for reverse osmosis applications. Accurate flow metering is simply achieved with the control of the output shaft speed.
Janus axial piston motors are based on the axial piston principle for high speed applications or with our range of gearboxes for low speed high torque systems.
The valves are manufactured as in line versions or integrated into custom designed blocks to reduce the number of expensive fittings required and enabling easier maintenance.